FFE-200 Fitting Epoxy is a custom blended flexible mastic of high quality epoxy resins,activators and engineered fillers. It produces a lightweight, flexible and easily-sanded compound which can be used for both fairing of deck substrates and the final glue-down of deck panels.
FFE-200 weighs only 6 pounds per gallon when cured, and its cell-like structure makes it an excellent sound and thermal insulator.
The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding.
Cures in temperatures as low as 45° F or 7°C.
Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time.
At 77° F, a layer of FFE-200 applied with a 3/16" toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours.
TDS Fitting & Fairing Epoxy is DOT non-corrosive, so it does not require hazardous labeling for shipment.